Tool Kit Compatible With Tubular Rivets And T-handle Die Driver Compat

Tool Kit Compatible With Tubular Rivets And T-handle Die Driver Compatible With Tonka Pinball Vent Window Restoration 1/8 Inch Diameter

$60.91 $169.15

Report Item
Specification:
Type: Tubular Tool Kit
Color: Black
Fitment:
Compatible With Pinball Vent Window Restoration
Package included:
1 Set of Tubular Tool Kit (As picture show)
Tips Compatible With Use - T-HANDLE DIE DRIVER
The tool is not suitable Compatible With solid rivets with a diameter larger than 1/8 inch or rivets made from stainless steel or hardened materials.Before using the tool, carefully determine the length of the rivets required Compatible With the job.
Step 1: Choose the die driver that matches the job.
The T-handle die driver is quick and convenient.Use the hex head die driver in tight spaces where the T-handle would strike the work.
Step 2: Install the die in the direction that suits the job.
The dies are interchangeable in the tool, allowing Compatible With clinching with the head inside or outside the work.The dies are secured in place by friction; simply pull them out to remove.
Step 3: Calculate the correct length Compatible With the job.
A) Use a digital caliper to measure the thickness of your work, rounding to the nearest.001 inch (thousandth of an inch).This step is essential.
B) Add the clinch allowance to your work thickness.Compatible With a 1/8 inch diameter, the clinch allowance is 0.074 inches.
C) Choose a length that matches your work thickness plus the clinch allowance measurement.Rivets are sold in lengths with 1/32 inch increments.Compatible With a tight clinch, your measurement must fall within the 's +/-.015' range.
Step 4: Apply the tool and clinch until 'just snug.'
Tighten the tool to clinch until it is 'just snug.' Pause to check your work.When the length is appropriate, tightening the tool until snug will yield a rolling clinch.
Compatibility Disclaimer: This is an aftermarket replacement part.Any brand names or model designations mentioned are used solely Compatible With the purpose of demonstrating compatibility.